What Is Semiconductor Optoelectronics? A Complete Introduction
This article covers what semiconductor optoelectronics is (the branch of electronics that deals with light - generating, detecting, and controlling light using semiconductor materials and devices), the fundamental physics (the band gap, photon emission, and photon absorption), the five main device categories (light-emitting diodes, laser diodes, photodiodes, phototransistors, and solar cells), the key semiconductor materials (GaAs, InP, GaN, SiC, silicon, and germanium), the five application domains (display, communication, sensing, lighting, and energy), and the five most important performance specifications that engineers evaluate when selecting optoelectronic components.
What Is Semiconductor Optoelectronics? Quick Answer
Semiconductor optoelectronics is the field of electronics that uses semiconductor materials to generate, detect, modulate, or control light - covering light-emitting diodes (LEDs) that emit light when electrical current flows through a semiconductor junction, laser diodes that emit coherent stimulated radiation, photodiodes and phototransistors that convert light into electrical current, and solar cells that convert photons from sunlight into electrical power. The core principle is the semiconductor band gap: when electrons in a semiconductor fall from a higher energy level (conduction band) to a lower energy level (valence band), they release energy in the form of a photon (light) - this is electroluminescence, the principle behind LEDs and laser diodes. Conversely, when a photon strikes a semiconductor, it can excite an electron from the valence band to the conduction band, creating a current - this is the photoconductive effect, the principle behind photodiodes and solar cells. The band gap energy, measured in electronvolts (eV), determines the wavelength of light that a semiconductor can emit or detect. Silicon has a band gap of 1.12 eV (detecting infrared but not efficiently emitting visible light), while gallium arsenide (GaAs) at 1.42 eV emits in the red and near-infrared, and gallium nitride (GaN) at 3.4 eV emits in blue and ultraviolet. The entire optoelectronics industry - from smartphone displays to fiber-optic internet to solar panels - is built on these band gap relationships.
The Fundamental Physics: Band Gaps, Photons, and the P-N Junction
How Semiconductors Interact with Light at the Atomic Level
The semiconductor photon interaction table (Featured Snippet):
| Process | Direction | What happens | Device |
|---|---|---|---|
| Electroluminescence | Electrical energy → Light | Electrons recombine with holes across the band gap, releasing photons | LED, laser diode |
| Photoconduction | Light → Electrical energy | Photons with energy greater than the band gap create electron-hole pairs, generating current | Photodiode, solar cell |
| Photovoltaic effect | Light → Electrical energy | Same as photoconduction, but optimized for power generation (zero bias) | Solar cell |
| Absorption | Light → Heat | Photons with energy below the band gap are absorbed as lattice vibrations (heat), not current | All semiconductors - an unavoidable loss mechanism |
The semiconductor band gap is the energy difference between the valence band (where electrons are bound to atoms) and the conduction band (where electrons are free to move through the crystal lattice) - and this energy difference, measured in electronvolts (eV), determines the wavelength of light that a semiconductor can emit or absorb: A photon with energy equal to or greater than the band gap can be absorbed by the semiconductor, exciting an electron from the valence band to the conduction band. This creates a free electron in the conduction band and a free hole in the valence band - a charge carrier pair. If an external voltage is applied, these carriers move, creating current. This is the photoconductive effect and the operating principle of photodiodes, phototransistors, and solar cells. Conversely, when an electrical current flows through a semiconductor junction, electrons in the conduction band recombine with holes in the valence band. The energy released by this recombination is emitted as a photon. The wavelength of the photon is determined by the band gap energy: wavelength (in nanometers) = 1,240 / band gap energy (in eV). This is the electroluminescence principle behind LEDs and laser diodes. Silicon has a band gap of 1.12 eV, which corresponds to a wavelength of approximately 1,107 nm - in the infrared. This is why silicon efficiently detects near-infrared and visible light, but does not efficiently emit visible light (it is an indirect band gap semiconductor, making light emission inefficient). GaAs has a direct band gap of 1.42 eV, corresponding to 873 nm (near-infrared), and it efficiently emits light - this is why GaAs is the material of choice for red LEDs, infrared LEDs, and laser diodes in the 650–1,550 nm range used in fiber-optic communications. GaN, with a wide direct band gap of 3.4 eV, corresponds to 365 nm (deep ultraviolet) - this is why GaN is the material of blue and white LEDs and blue laser diodes. The p-n junction is the fundamental structure of all semiconductor optoelectronic devices. A p-n junction is formed by joining p-type semiconductor (doped with elements that create holes - electron deficiency) with n-type semiconductor (doped with elements that create extra electrons). At the junction, a depletion region forms where mobile charge carriers are swept away, creating an electric field. In a forward-biased LED, current flows and electrons recombine with holes in the depletion region, emitting photons. In a reverse-biased photodiode, incident photons create electron-hole pairs in the depletion region, and the electric field sweeps these carriers out, creating a photocurrent.
The Five Main Device Categories
LEDs, Laser Diodes, Photodiodes, Phototransistors, and Solar Cells
The five device categories table (Featured Snippet):
| Device | Function | Key physics | Key spec | Typical application |
|---|---|---|---|---|
| LED (Light-Emitting Diode) | Converts electrical current into light | Electroluminescence at p-n junction | Wavelength, luminous flux (lm), viewing angle, forward current | Displays, indicator lights, general lighting |
| Laser Diode | Emits coherent, monochromatic, narrow-beam light | Stimulated emission at p-n junction with optical cavity | Wavelength, output power (mW/W), beam divergence, threshold current | Fiber-optic transceivers, laser pointers, LiDAR, barcode scanners |
| Photodiode | Converts light into electrical current | Reverse-bias photoconduction | Spectral response (nm), responsivity (A/W), dark current, response time | Optical communication receivers, light meters, proximity sensors |
| Phototransistor | Amplifies light-induced current | Transistor with base exposed to light | Current transfer ratio, collector-emitter voltage, response time | Light barriers, position sensors, optical encoders |
| Solar Cell | Converts sunlight into electrical power | Photovoltaic effect (zero-bias photoconduction) | Efficiency (%), open-circuit voltage (V), short-circuit current (A), fill factor | Rooftop solar panels, solar farms, portable solar chargers, spacecraft |
The five main categories of semiconductor optoelectronic devices - LEDs, laser diodes, photodiodes, phototransistors, and solar cells - each use the semiconductor band gap in a different way to either emit light or convert light into electrical signals: LED (Light-Emitting Diode): the LED is the most ubiquitous semiconductor optoelectronic device. When a forward voltage is applied across the p-n junction (typically 1.8–3.3 V depending on the material and color), current flows and electrons recombine with holes at the junction, releasing photons. The color of the light is determined by the semiconductor's band gap. Traditional LEDs use compounds like gallium arsenide phosphide (GaAsP, red-orange-yellow), aluminum gallium indium phosphide (AlGaInP, high-brightness red, orange, yellow, and green), and gallium nitride (GaN, blue, violet, and white). The key performance metrics are the luminous flux (measured in lumens, lm - how much light the human eye perceives), the forward current (typically 20 mA for standard LEDs, up to several amps for high-power LEDs), the viewing angle (typically 15°–120°), and the color rendering index (CRI - for white LEDs used in general lighting, a higher CRI means better color accuracy). White LEDs are either blue GaN LEDs with a phosphor coating (the blue light excites yellow phosphors, and the combination appears white) or ultraviolet LEDs with RGB phosphors. Laser Diode: the laser diode is like an LED with one critical addition - an optical cavity formed by two mirrored surfaces on either side of the p-n junction. This cavity causes stimulated emission, where one photon bouncing between the mirrors triggers multiple photons of the same wavelength, phase, and direction to be emitted. The result is coherent light - all photons at the same wavelength, in phase, and in a narrow beam. Key metrics are the wavelength (650 nm for red pointers, 780 nm for CD players, 850/1,310/1,550 nm for fiber-optic communications), the output power (from milliwatts for pointers to watts for industrial cutting and welding), the threshold current (the minimum current needed to achieve lasing), and the beam divergence (how much the beam spreads over distance - lower is better). The 1,310 nm and 1,550 nm wavelengths are used in fiber optics because these wavelengths have the lowest attenuation in silica fiber. Photodiode: the photodiode is a p-n junction operated in reverse bias. When photons strike the depletion region, they create electron-hole pairs, which are swept out by the electric field, creating a photocurrent proportional to the light intensity. The key metrics are the spectral response (which wavelengths the photodiode is sensitive to), the responsivity (how much current is generated per watt of incident light, measured in A/W), the dark current (the current that flows even in complete darkness - a noise source), and the response time (how fast the photodiode can react to changes in light - critical for high-speed communication receivers). PIN photodiodes have an intrinsic (undoped) layer between the p and n regions, which increases the depletion region width and improves response time and sensitivity. Avalanche photodiodes (APDs) use a high reverse-bias voltage to create an avalanche multiplication effect, providing internal gain (10–100×) and making them sensitive enough to detect single photons in lidar and fiber-optic communication receivers. Phototransistor: the phototransistor is a transistor where the base region is exposed to light. Instead of a base current, the base is illuminated - photons create base carriers that are amplified by the transistor's current gain (beta). The result is a much higher output current than a photodiode for the same light input, but with a slower response time. The key metric is the current transfer ratio (collector current divided by base current, expressed as a percentage). Phototransistors are used in light barriers, optical encoders, and position sensors where the higher sensitivity of the phototransistor outweighs its slower speed compared to photodiodes. Solar Cell: the solar cell is a large-area photodiode optimized for power generation. Unlike a photodiode, which is operated with an external reverse bias, the solar cell operates with zero bias (photovoltaic mode) - the light-generated carriers create a voltage directly. The key metrics are efficiency (the percentage of incident sunlight converted to electrical power - commercial silicon solar cells are 18–24% efficient; laboratory perovskite cells have reached 33%), open-circuit voltage (Voc - approximately 0.6 V for silicon under full sun), short-circuit current (Isc - proportional to cell area and solar irradiance), and fill factor (a measure of the quality of the current-voltage curve, typically 0.75–0.85 for good silicon cells). Multiple solar cells are connected in series and parallel to form modules, and modules are connected to form arrays for practical power generation systems.
The Key Semiconductor Materials and Their Band Gaps
Choosing the Right Material for the Wavelength and the Application
The materials table (Featured Snippet):
| Material | Band gap (eV) | Emits (wavelength) | Detects (wavelength) | Key applications |
|---|---|---|---|---|
| Silicon (Si) | 1.12 | Poor emission (indirect gap) | 190–1,100 nm (VIS-NIR) | Solar cells, photodiodes, phototransistors |
| Germanium (Ge) | 0.66 | Poor emission (indirect gap) | 400–1,700 nm (VIS-NIR-SWIR) | SWIR photodiodes, early laser diodes |
| Gallium Arsenide (GaAs) | 1.42 | 650–870 nm (red-NIR) | 650–900 nm | Red LEDs, infrared LEDs, laser diodes (650–1,550 nm) |
| Gallium Phosphide (GaP) | 2.26 | 560–700 nm (yellow-red) | 400–700 nm | Yellow, orange, and green LEDs |
| Gallium Nitride (GaN) | 3.4 | 365–560 nm (UV-blue-white) | 365–400 nm (UV) | Blue LEDs, white LEDs, blue laser diodes, UV sensors |
| Indium Gallium Arsenide (InGaAs) | 0.75–1.42 (varies) | 1,000–1,650 nm (NIR-SWIR) | 900–1,700 nm (SWIR) | Fiber-optic receivers, SWIR cameras, LiDAR |
| Silicon Carbide (SiC) | 3.26 | Very poor emission | 200–400 nm (UV) | UV photodiodes, high-temperature electronics |
| Indium Phosphide (InP) | 1.35 | 1,000–1,650 nm | 1,000–1,650 nm | Laser diodes for fiber optics (1,550 nm), photodetectors |
The key semiconductor materials in optoelectronics are chosen primarily by their band gap, which determines the wavelength of light they emit or detect - and secondarily by their material properties (thermal conductivity, carrier mobility, lattice constant, and maximum operating temperature), which determine where they can be used: Silicon: the workhorse of optoelectronics for detection. Silicon photodiodes and phototransistors are the lowest-cost and highest-volume optoelectronic devices in the world - found in smartphone cameras, solar panels, optical mice, and industrial light sensors. The limitation is that silicon is an indirect band gap semiconductor, which makes light emission extremely inefficient (less than 0.01% internal quantum efficiency), preventing its use in LEDs and laser diodes. For emission, silicon is essentially useless. Gallium Arsenide (GaAs): the material that enabled the LED revolution and the fiber-optic age. GaAs is a direct band gap semiconductor, making it an efficient light emitter. Red LEDs (invented in the 1960s using GaAsP, extended to GaAs) were the first practical semiconductor light emitters. GaAs-based compounds - AlGaAs (aluminum gallium arsenide, higher band gap for shorter wavelengths) and InGaAs (indium gallium arsenide, lower band gap for longer wavelengths) - cover the wavelength range from 620 nm (deep red) to 1,700 nm (short-wave infrared). InGaAs photodetectors and InP laser diodes are the backbone of fiber-optic communications at 1,310 nm and 1,550 nm. Gallium Nitride (GaN): the material that made blue LEDs and white lighting possible. The Nobel Prize in Physics 2014 was awarded to Isamu Akasaki, Hiroshi Amano, and Shuji Nakamura for inventing the blue GaN LED in the early 1990s. Before GaN, there were red and green LEDs but no efficient blue LED - without blue, white LEDs and blue laser diodes were impossible. GaN enabled white LED lighting (which is actually a blue LED with a phosphor coating), blue laser diodes (used in Blu-ray players, laser projectors, and automotive headlights), and UV LEDs (for disinfection, curing, and medical applications). GaN also operates at higher temperatures and voltages than GaAs, making it suitable for power electronics and RF amplifiers as well as optoelectronics. Silicon Carbide (SiC): the wide band gap material for UV detection and high-temperature operation. SiC has a band gap of 3.26 eV, corresponding to a wavelength of 380 nm (near-UV). SiC UV photodiodes are used in flame detection, UV index monitoring, and industrial flame sensing (combustion monitoring). The wide band gap also gives SiC a very low dark current and excellent radiation hardness, making SiC photodiodes suitable for space applications. Indium Phosphide (InP): the material of choice for fiber-optic laser diodes at 1,310 nm and 1,550 nm. InP-based laser diodes and photodetectors form the physical layer of the global fiber-optic internet. The 1,310 nm window has minimum chromatic dispersion in standard single-mode fiber; the 1,550 nm window has minimum attenuation (0.2 dB/km vs 0.35 dB/km at 1,310 nm) and is used for long-haul and submarine fiber-optic links.
Five Application Domains Where Semiconductor Optoelectronics Is Used
Display, Communication, Sensing, Lighting, and Energy
The five application domains table (Featured Snippet):
| Domain | Key devices used | Examples | Why semiconductor optoelectronics matters |
|---|---|---|---|
| Display | LEDs (all colors), OLEDs, micro-LEDs | TV screens, smartphone displays, digital signage, car dashboards | Energy efficiency (vs LCD backlights), contrast ratio, design flexibility |
| Communication | Laser diodes, photodiodes, InP and InGaAs devices | Fiber-optic transceivers, LiDAR, optical encoders, visible light communication | Speed, bandwidth, low attenuation over long distances |
| Sensing | Photodiodes, phototransistors, LEDs (as emitters) | Proximity sensors, ambient light sensors, pulse oximeters, smoke detectors | Small size, low power, integration with silicon electronics |
| Lighting | LEDs, OLEDs | General illumination, automotive headlights, horticultural grow lights, UV disinfection | Energy efficiency (75% less energy than incandescent), 50,000+ hour lifetime |
| Energy | Solar cells | Rooftop solar panels, solar farms, portable solar chargers, spacecraft power | Renewable, scalable, declining cost (solar module cost fell 99% since 1976) |
The five application domains of semiconductor optoelectronics - display, communication, sensing, lighting, and energy - each represent a multi-billion dollar market built on the fundamental physics of the semiconductor band gap: Display: the display industry is the largest commercial application of semiconductor LEDs. Modern LCD TV and monitor panels use LED backlights (white LEDs behind the LCD panel) for energy efficiency and thin form factor. OLED (Organic LED) displays use organic semiconductor compounds that emit light directly - no backlight is needed - resulting in perfect blacks, higher contrast ratios, and thinner panels than LCD. Micro-LED displays use individual microscopic GaN LEDs as each pixel, offering the contrast of OLED with the brightness of LED. The market for LED and OLED displays is driven by smartphones, TVs, laptops, wearables, and automotive dashboards. Communication: fiber-optic communication is the backbone of the global internet - virtually all data between continents travels over silica fiber cables at wavelengths of 850 nm, 1,310 nm, and 1,550 nm, transmitted by InP and GaAs laser diodes and received by InGaAs photodiodes. The data rate of fiber-optic links has grown from 2.5 Gbps in the 1990s to 800 Gbps per wavelength in 2026, driven by advances in laser diode modulation and photodetector sensitivity. LiDAR (Light Detection and Ranging) uses laser diodes (905 nm for automotive, 1,550 nm for long-range) and photodetectors to build a 3D map of the environment - it is a core sensor for autonomous vehicles and is also used in surveying, mapping, and industrial automation. Sensing: the smallest and lowest-cost optoelectronic devices - photodiodes and phototransistors - are embedded in billions of devices for sensing. Proximity sensors in smartphones use a VCSEL (Vertical-Cavity Surface-Emitting Laser) emitting at 940 nm and a photodiode to detect when the phone is near the user's ear. Ambient light sensors use photodiodes to detect room brightness and adjust screen backlight automatically. Pulse oximeters use red (660 nm) and infrared (940 nm) LEDs with photodiodes to measure blood oxygen saturation - the differential absorption of red and infrared light by oxygenated and deoxygenated hemoglobin is converted to an SpO₂ reading. Smoke detectors use a LED and a photodiode at a right angle - smoke particles scatter the LED light onto the photodiode, triggering the alarm. Lighting: the LED has transformed general lighting. A 10-watt LED bulb produces the same light output (800 lumens) as a 60-watt incandescent bulb - a 6× improvement in energy efficiency. The lifetime of an LED bulb is 25,000–50,000 hours vs 1,000 hours for an incandescent - 25–50× longer. The LED's energy efficiency means it produces 80–90% less heat than an incandescent for the same light output, reducing air conditioning load. Horticultural grow lights use red (660 nm) and blue (450 nm) LEDs to optimize plant photosynthesis - the specific wavelengths drive chlorophyll absorption peaks more efficiently than broad-spectrum white light. UV-C LEDs (at 265 nm) are used for water and air disinfection, replacing mercury UV lamps with a safer, more compact, and more energy-efficient alternative. Energy: solar photovoltaic energy is the fastest-growing source of electricity generation globally. Silicon solar cells (monocrystalline and polycrystalline) are the dominant technology, accounting for over 90% of the global solar market. The cost of solar modules has fallen from $76 per watt in 1977 to under $0.20 per watt in 2026 - a 99.7% reduction in 49 years, the fastest cost decline of any energy technology in history. Tandem and perovskite solar cells, which stack multiple semiconductor materials with different band gaps to capture more of the solar spectrum, are approaching 30% efficiency in the laboratory and are expected to enter commercial production in the late 2020s.
Five Key Specifications When Evaluating Optoelectronic Components
Wavelength, Power, Responsivity, Speed, and Operating Temperature
The five key specs table (Featured Snippet):
| Specification | What it measures | Why it matters | Typical range |
|---|---|---|---|
| Wavelength (nm) | The color or frequency of light emitted or detected | Must match the application - wrong wavelength = wrong color or no detection | 200–10,600 nm |
| Optical power (mW or W) | How much light energy is output (emitters) or the minimum detectable light (detectors) | Determines brightness, detection range, and system design margin | 0.01 mW–100 W |
| Responsivity (A/W) | Detector output current per watt of incident optical power | Higher = more sensitive detector | 0.1–1.0 A/W |
| Response time / bandwidth (ns or MHz) | How fast the device can react to changes in light intensity | Critical for communications (needs MHz–GHz); less critical for lighting | 1 ns–1 ms |
| Operating temperature (°C) | The temperature range over which the device operates within spec | High-power LEDs and laser diodes generate heat - thermal management is critical | –40°C to +85°C for most; +200°C for SiC |
FAQ
Q1: What is the difference between a semiconductor LED and a laser diode?
The key difference is coherence and spectral width. An LED emits spontaneous light - photons are emitted randomly in all directions with a broad spectral width (typically 20–100 nm full width at half maximum, FWHM). A laser diode emits stimulated light - all photons have the same wavelength, phase, and direction, resulting in a narrow beam and a very narrow spectral width (typically 1–5 nm). The laser diode also has a much higher power density (more light in a smaller area) and a longer range. LEDs are used for general lighting, indicators, and displays. Laser diodes are used for fiber-optic communications, LiDAR, barcode scanners, laser pointers, and industrial cutting and welding.
Q2: Why is silicon not used to make LEDs?
Silicon is an indirect band gap semiconductor, which means that an electron transitioning from the conduction band to the valence band requires a simultaneous change in momentum as well as energy. Light is a photon with no momentum - this means that the probability of an electron in silicon emitting a photon when it recombines with a hole is extremely low (less than 0.01%). Direct band gap semiconductors like GaAs and GaN have the same momentum in the conduction band and valence band, so electron-hole recombination efficiently emits photons. GaAs, InGaP, and GaN are used for LEDs. For detection, silicon works perfectly well because absorption does not require a direct band gap - silicon efficiently absorbs photons with energy above its band gap, making silicon photodiodes and solar cells highly efficient.
Q3: What is VCSEL and why does it matter?
VCSEL stands for Vertical-Cavity Surface-Emitting Laser - a type of laser diode where the light beam is emitted perpendicular to the surface of the chip (vertically) rather than from the edge of the chip (as in an edge-emitting laser diode). The vertical emission allows VCSELs to be fabricated in 2D arrays on a single wafer, tested on-wafer before dicing, and manufactured at lower cost than edge-emitting lasers. VCSELs typically operate at 850 nm or 940 nm and are used in smartphone proximity sensors (the dot projector that detects your face for Face ID uses a VCSEL array), 3D sensing cameras, data center optical interconnects, and automotive LiDAR. The VCSEL market has grown rapidly since 2017, driven by the adoption of 3D sensing in smartphones.
Q4: What is the most efficient solar cell material?
The highest-efficiency single-junction solar cell is gallium arsenide (GaAs), with laboratory efficiencies reaching 33.9% (for multi-junction GaAs cells under concentration). For commercial silicon solar panels, the typical efficiency is 18–24% for monocrystalline silicon and 15–18% for polycrystalline silicon. The theoretical maximum efficiency for a single-junction silicon solar cell (the Shockley-Queisser limit) is 33.7% - most commercial silicon cells are approaching this limit. Tandem solar cells, which stack two or more semiconductor absorbers with different band gaps, can exceed the Shockley-Queisser limit by capturing a broader range of the solar spectrum. Perovskite/silicon tandem cells have reached 33.9% efficiency in the laboratory (2023), and perovskite/GaAs triple-junction cells have reached 47.6% under concentration. Commercial tandem solar cells are expected to reach the market in the late 2020s.
Q5: How do UV-C LEDs differ from UV-C mercury lamps?
UV-C LEDs and UV-C mercury lamps both produce ultraviolet light at 100–280 nm for disinfection, but they differ in four key ways. First, the wavelength: mercury lamps emit at 254 nm (a single line), while UV-C LEDs emit over a range within 260–280 nm (tunable within the UV-C band). Second, the form factor: mercury lamps are long glass tubes requiring high voltage (several thousand volts) and containing toxic mercury; UV-C LEDs are small solid-state chips operating on low voltage (typically 6–10 V) with no toxic materials. Third, the lifetime: mercury lamps last 8,000–12,000 hours; UV-C LEDs last 10,000–50,000 hours. Fourth, the warm-up time: mercury lamps take 1–5 minutes to reach full output after ignition; UV-C LEDs reach full output instantly. UV-C LEDs are replacing mercury lamps in point-of-use water disinfection, air purification, and surface sterilization applications, though mercury lamps remain dominant in large-scale water treatment due to their lower cost per watt of UV-C output.
The Bottom Line
Semiconductor optoelectronics is the field built on a single physical fact - the semiconductor band gap determines what wavelength of light a material can emit or detect - and it has produced five categories of devices (LEDs, laser diodes, photodiodes, phototransistors, and solar cells) that have fundamentally transformed five industries: display, communication, sensing, lighting, and energy. The choice of semiconductor material is the primary design decision in any optoelectronic system: GaAs and its compounds for red through near-infrared emission and detection; GaN for blue, violet, ultraviolet, and white emission; InGaAs for short-wave infrared detection; InP for fiber-optic communications at 1,310 and 1,550 nm; SiC for ultraviolet detection and high-temperature operation; and silicon for the vast majority of photodetection applications (cameras, solar cells, proximity sensors) where cost and volume dominate. The one-sentence rule: semiconductor optoelectronics converts electrons into photons (for emission) and photons into electrons (for detection) - and the semiconductor band gap is the single physical parameter that determines everything: the wavelength, the efficiency, the material, and the application.
Last updated: August 2026
Disclaimer: This article is a general educational introduction to semiconductor optoelectronics for reference purposes. Technical specifications, material properties, efficiency figures, and performance data are based on publicly available semiconductor physics literature, manufacturer datasheets, and industry reports as of 2026 and may vary by specific device, manufacturer, and operating conditions. Band gap values, efficiency figures, and wavelength ranges are representative averages - always verify with the specific device manufacturer's datasheet. Solar cell cost figures and market projections are based on publicly available industry data (BNEF, IEA, NREL) and are subject to change. No specific brand, manufacturer, or product is endorsed or recommended. Applications in safety-critical systems (medical devices, automotive LiDAR, industrial flame detection) must comply with applicable standards and regulations and should be designed by qualified engineers. This article does not constitute engineering, legal, or regulatory advice.
